Southern Industrial Drive Technologies • Experts in solid-state AC & DC drives and machine controls
Call (727) 581-5620
PRODUCTS: SOFT STARTERS - SAF
240 VAC from 10 – 400 HP.
480 VAC from 20 – 800 HP.
575 VAC from 30 – 1000 HP.
200 – 600 VAC 3 phase universal voltage, 50/60Hz (+/- 10%)
Jog Speed: – 14% of full speed forward, – 20% of full speed reverse
500% overload for 30 sec. 115% continuous
Single control card throughout complete range
Class 10, 15, 20, or 30 electronic motor overload
Current regulated closed loop
Fault Display actual text
Dual operation modes to match any application: – Constant Current mode for light loads or limited power supplies – Current Ramp mode for high inertia or heavy loads
Two or three wire control
120 VAC control inputs for: Start, Stop, Jog, Reverse, Reset, Enable
Keypad and LCD display for starter setup, status and diagnostics.
Hardware for Remote Panel mounting of keypad.
MOVs and Incoming / Outgoing Connection Lugs.
Simple user setup
Single phase protection
Phase rotation insensitive
Instantaneous over-current trip
Shorted SCR Fault output
Shear pin Fault
Dry contact relay outputs for: – Fault, By-pass, Shorted SCR, Running, Reverse
CSA and UL Approved
2 Year Warranty
Solid State Full Speed Reversing
DC Injection Braking
Modicon TCP Ethernet IP
NEMA 1, 3R, 4, 4X, 12
Combination Starter (Fused, Non-Fused Disconnect, or Circuit Breaker)
HP Rated Up to Speed Bypass Contactor
Control Power Transformer
To order call (727) 581-5620
Copyright © 2015-2017 SID-TEC. All Rights Reserved. SID-TEC and its logo are trademarks and service marks owned by SID-TEC Inc. (Southern Industrial Drive Technologies).
All other trademarks on this site are the property of their respective owners. Site design and maintenance by www.DesignStrategies.com.