Single Phase DC Drives
Product Details
- 240 VAC from 10 – 400 HP.
- 480 VAC from 20 – 800 HP.
- 575 VAC from 30 – 1000 HP.
Standard Features
| 200 – 600 VAC 3 phase universal voltage, 50/60Hz (+/- 10%) | Keypad and LCD display for starter setup, status and diagnostics. |
| Jog Speed: – 14% of full speed forward, – 20% of full speed reverse | Hardware for Remote Panel mounting of keypad. |
| 500% overload for 30 sec. 115% continuous | MOVs and Incoming / Outgoing Connection Lugs. |
| Single control card throughout complete range | Bypass Lugs |
| Class 10, 15, 20, or 30 electronic motor overload | Simple user setup |
| Current regulated closed loop | Single phase protection |
| Fault Display actual text | Phase rotation insensitive |
| Dual operation modes to match any application: – Constant Current mode for light loads or limited power supplies – Current Ramp mode for high inertia or heavy loads | Instantaneous over-current trip |
| Soft stop | Shorted SCR Fault output |
| Two or three wire control | Shear pin Fault |
| 120 VAC control inputs for: Start, Stop, Jog, Reverse, Reset, Enable | Dry contact relay outputs for: – Fault, By-pass, Shorted SCR, Running, Reverse |
| CSA and UL Approved | |
| 2 Year Warranty |
Optional Features
| Solid State Full Speed Reversing | |
| DC Injection Braking | Combination Starter (Fused, Non-Fused Disconnect, or Circuit Breaker) |
| Communication Networks: | HP Rated Up to Speed Bypass Contactor |
| Modicon TCP Ethernet IP | Control Power Transformer |
| NEMA 1, 3R, 4, 4X, 12 |
To order call (727) 581-5620
3 Phase PL or PLX Drives
Product Details
3Phase DC Drives Non-Regen Models.
- 240 VAC Supply 240 VDC at 10 – 200HP.
- 480 VAC Supply 500 VDC at 20 – 400HP.
3Phase DC Drives Regen, Reversing Models.
- 240 VAC Supply 240 VDC at 10 – 150HP.
- 480 VAC Supply 500 VDC at 20 – 300HP.
Large 3Phase DC Drives Non-Regen Models.
- 480 VAC Supply 500 VDC at 20 – 1380HP.
- 700 VAC Supply 700 VDC at 550 – 1940HP.
Standard Features
• Totally digitally controlled
• Basic peer-to-peer link
• 40 character backlit display
• Flexible plug in I/O
• RS 232 Serial Port
Field Regulator
• Field weakening
• Field economy
Programmable Control Functions
• PID loop
• Winder
• Orientation
Feedback Options
• Analog Tach
• Encoder
• Armature feed back
• Auto-tune
Optional Features
• Peer-to-peer Ethernet communications
• SFD Programming control
• Modbus TCP and EIP over Ethernet
• Modbus RTU RS485 serial port
• Devicenet
• Profibus DP
Standards
- UL, C-UL, CE